Why does the Electric Transfer Cart Body Get Unstable?

Electric transfer cart has stability as well as reliability, some of the transfer car after a period of time, will occasionally appear left and right swaying problems, encounter these situations arise for a number of reasons, most of the reasons are caused by some details of the problem, the following are a few common reasons for the instability of the body of the electric transfer cart.

1. In the process of using the electric flat car for a long time, it may be affected by certain factors, resulting in the deformation of its front hub or the unequal number of tire bolts, which will lead to the shaking phenomenon.
2. Voltage is too low: the end voltage is 10% lower than the rated voltage, its starting torque is too small, so that the electric flat car can not move, check, use a multimeter or voltmeter, etc. to measure the electric flat car input end voltage.
3. Gearbox failure: stop and check, first determine whether the reducer gearbox or bearings in use before the use of lubricating oil, whether the use of regular replacement of lubricating oil, such as no lubrication as required, the reducer will not only produce excessive-high “hum” sound, but also excessive wear or damage to gears and bearings.
4. When loading and unloading goods, heavy goods should be smoothly placed in the middle part of the electric flat car, to do the goods lightly, placed in an orderly manner, placed goods can not be overloaded, over-length, over-width, around do not have people around.

The following points are the introduction of several factors that cause unstable body when we operate the electric flat car, any questions can be contacted with us Henan Perfect Transfer Cart.